Tweet
S2U2 is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device. It has CallerID function (but it may not work on some devices, so try it before use it daily); S2P control plugin; and volume control. It can show many system information even without unlocking and highly customizable.
S2U2 image S2U2 image prerequisition
- WM5 Phone or WM6/6.1/6.5 Professional devices
- free RAM: at least 1M for QVGA/WQVGA; 4M for VGA/WVGA
Changes of v2.10:
- further enhanced S2U2 Settings to edit the Exceptional EXEs list; change the run application after unlock;
and change "Language" (must download the language pack & copy it to S2U2's installed folder first).
- added to show Caller/Sender pics on the missed call/message pop-up.
- added to show account name on the email pop-up.
- added option to show "Active" or "Due Today" task. (S2U2 Settings -> Information -> Task Count)
- added option to set the "Top Curtain" floats. (S2U2 Settings -> Appearance -> Top Curtain)
- added a new set of graphic files for showing the full-screen battery - battery0.png, battery10.png... battery100.png.
download the S2U2BatteryPack-QVGA.zip or S2U2BatteryPack-VGA.zip & refer to the BatteryReadme.txt inside for details.
- added option to show "Full Screen Battery on top of wallpaper".
- added Mouse lock for Omnia.
- added option to show S2P current album pic or not.
- re-added option GDI to "Display Mode" with faster performance.
- moved the option "Lock when Screen is Blank" to Power section to cater on battery and external power situations.
- extended the limit of "Boot up Delay" to 60s.
- fixed the corrupted screen on Touch Pro 2 when the orientation is changed, change the "Display Mode" to GDI.
- fixed the mis-shown of Bluetooth icon on Touch Pro 2.
- improved compatibility with WM6.5 devices, especially the CallerID.
- a few minor bugs fixed.
Changes of v2.14: new 18/11
- changed the Volume Control layout so that Volume Up/Down keys can toggle between normal, silent and vibrate.
- added support to "Simple Mode" volume control on some new HTC devices.
- added support to "My Location" weather with TouchFLO 3D v2.5.
- added an option to lock the device after any phone call when Bluetooth is on. (S2U2 Settings -> General)
- improved compatibility with WM6.5 devices, especially the CallerID.
but it's not recommended to use the CallerID together with the WM built-in lock.
- fixed an occasional power leak when the device is sleeping.
- added Bulgarian language support.
- a few minor bugs fixed.
[DOWNLOAD]http://s2u2.ac-s2.com/[/DOWNLOAD]
Code:
http://s2u2.ac-s2.com/
This hotfix fixed:
- the GIF wallpaper problem when "Battery on top of wallpaper" is ON.
- if the CallerID of v2.04 works on your device but does not work with v2.10 (the hardware key & system incoming call screen problem), please try this & let me know the result. Thanks.
P.S. the zip file only contains iLock2.exe & S2U2.exe. Stop iLock2 & then overwrite the installed one.
Changes of v2.20:
- removed the option "lock the device after any phone call when Bluetooth is on".
- added option "InCall Lock" (S2U2 Settings -> General)
either don't lock the device during a phone call; always lock; or only when Bluetooth is on.
if CallerID is enabled, connected time of the call will be shown on the lock screen.
- added option to release the Volume Control key lock, i.e. adjust the volume even it's locked. (S2U2 Settings -> Phone)
- fixed an occasional issue that Dotfred's TaskMgr would hang when running S2U2 since v2.x.
- fixed the small volume bar of the VGA/WVGA S2P control plugin.
- fine tuned the CallerID and S2U2 Settings for HTC Pro2 & HD2.
but it's not recommended to use the CallerID together with the WM built-in lock.
- a few minor bugs fixed.
Changes of v2.21 :
- renamed "InCall Lock" to "Lock on Talk"; additional option for using external power; and moved to S2U2 Settings -> Power.
- added option - "Don't lock system"; when it's on, the system will behave the same as the old version. (S2U2 Settings -> Advanced)
since v2.20, when S2U2 locks the system, the system will behave as it's locked by the system built-in lock.
however, on some devices, it may lead to some not-welcome behaviour when locked:
for eg, on Omnia/Omnia II, the backlight will be dimmed; on some devices, unlock will always go to the home screen.
but there is a draw back when this option is turned on: some keys or system functions can be activated even it's locked.
- added to show the divert call status on the lock screen.
- a few minor bugs fixed.
Changes of v2.22
- added option to lock/unlock when open/close the Keyboard on some devices (e.g. HTC Pro/Pro2). (S2U2 Settings -> Others)
- fixed an occasional battery drain on some devices.
- fixed the Answer key was not locked on HTC HD2 even when "slide to answer" was active.
- fixed an occasional issue that S2P was invoked during BT file transfer.
- a few minor bugs fixed.
Changes of v2.24
- added option to change the information text size (S2U2 Settings -> Appearance).
- fixed an occasional system hang when stopping iLock2 & ActiveSync was running.
- tried to maintain the system idle time when the device is locked (when "Don't lock system" is turned OFF).
if you still want to have full control on this idle time, turn ON "Don't lock system"; otherwise it's still limited to 15 seconds.
- fixed the system SMS notification was not dismissed after reading the SMS on some devices.
- fixed the long press Answer key problem introduced by v2.22.
if the long press Answer key function still cannot be assigned normally, stop iLock2 & then delete the \windows\long_send.lnk first.
- fixed an occasional issue that S2P was invoked during BT file transfer (again).
- speeded up the transition between different orientation.
- improved the CallerID compatibility on some non-English devices.
- changed the DPAD function
I NOW WHE HAD PREVIUS RELEAS BUT I CANT FIND IT LOL
GRTZ CYBER WEESJE
SENIOR ADMIN@SPJ HIT THANKS ON THE WAY OUT
Comment